Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Page: 102 / 120

102 Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
Home
Lookup Tables - Tyre Pressure Setup (dash_p_target)
►
The desired air pressures (hot air pressures) for the tires on the front and rear axles can be entered
in the lookup tables in the "dash_p_target" tab.
To set the required hot - air pressure [bar] at the front, enter the value with one decimal place and
decimal point separators in Row 0
To set the required hot - air pressure [bar] at the rear, enter the value with one decimal place and
decimal point separators in Row 1
The default value for the front and rear axles is 1.9 bar
NOTE
The system will not accept value entered using a comma as the deci-
mal separator
NOTE
If the preset values are changed, the setup with the new values must
be transferred to the ICD using the "Send Setup" button. All data still
stored on the ICD will be lost when the changed setup is transferred!
NOTE
The built - in TPMS sensors learn automatically. The procedure can take
up to 120 seconds. The conditions necessary for learning are;

All sensors are recognised as being installed by the system
 The vehicle speed is >60Km/h
NOTE
ELECTRICS | Intelligent Color Display (ICD)