Porsche 911 GT3 Cup MR Gen. II, Technical Manual

Page: 29 / 120

29 Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
Home
NOTE
SUSPENSION | ABS
Detailed instructions on installing and operating the ABS can be down-
loaded from the download area on the Manthey - Racing website.
The RaceCon software from Bosch is required for communication with
the engine control unit (from version 2.5.5.8). In addition, the corres-
ponding project file (.rlp) with the designation "PA10_0410_991 -
CUPII_CU_0520_red_V02_de.rlp" must be opened for connection to
the engine control unit in RaceCon. These software tools can be obtai-
ned from the PMRSI. The Bosch Motorsport Interface MSA - Box II
including the appropriate driver is also required for communication
between the laptop and the vehicle.
The RaceABS software (at least version 1.4.0.9) from Bosch is requi-
red for communication, diagnosis and maintenance of the ABS M4. A
suitable FPS file for displaying the fault memory in plain text can be
obtained from the Manthey - Racing website.
After an engine revision (ECU will be sent in) or a firmware update, the
RaceCon must be checked to see whether the ABS is still activated in
the engine control unit. The control dial must be in position "1". If the
rotary control shown is set to "0", the ABS must be reactivated. To do
this, click the control dial. The controller position changes to value "1".
Click the "SAVE to ECU" button.
WARNING
NOTE
If the ABS is operated without the appropriate ICD configuration for
operation with ABS, the wheel speed sensors are no longer queried by
the system. This results in incorrect values for the total mileage and
the ABS has no function.
NOTE