Customer Services (858) 578-7887 & (888) GO IN
TEC
IN
TEC
Controls, 12700 Stowe Dr., Suite 110, Poway, CA 92064
Fax (858) 578-4633 & (888) FX IN
TEC
www.inteccontrols.com
Specification subject to change without notice.
Printed in USA 140225
Polygard® is a registered trademark of MSR
SPC3-11XX US
PolyGard
®
Single-Point Controller
User Manual - SPC3-11XX
Page 06
3 Menu Overview
The operation of the Single Point Gas Controller SPC3 is effected by a simple and logical menu structure that is easy
to learn.
The operating menu contains the following levels:
x
Starting menu.
x
Main menu
x
Submenu 1 and 2
Starting
menu
Main
menu Submenu
Display
and
reset
of
errors
See
from
point
3.1
Displays
the
status
of
actual
alarms
See
point
3.2
Display
of
the
relay
status
Manual
operation
of
the
relays
Reset
function
of
the
relays
See
from
point
3.3
Displays the Sensor Reading
See
point
3.4
Display and change of the relay setups
See
from
point
3.5
Display
and
change
of
the
sensor
point
setups
Activate
or
Deactivate
SP
Assignment
of
the
alarms
to
the
alarm
relay
See
from
point
3.6
Display
and
change
of
the
system
setups
See
from
point
3.7
System Errors
Stage Status
Relay Status
Sensor Reading
Relay Setup
SP Setup
System Setup
INTEC
SPC3
2.3
Code Level
Code Level 1 Default Password =
(1234)
/ Code Level 2 Password =
(9001)
All changes of setups and set point values are protected by a four-digit numeric code (= password).
The code level 1 permits the operation of the SPC3; this code level is intended for the customer. The code can be
changed individually via code level 2;
see section 3.7.6.
In code level 2 all setups and set points are released; this code level is only for the service technician.
Code level 2
cannot be changed or deleted.
The release of the code level is deleted if no button is pushed within 15 minutes.
All menu windows are visible without entering a code.
