Polycom SoundPoint IP 500 Administrator'S Manual Download Page 125

Page: 125 / 166

Administrator Guide - SoundPoint

IP / SoundStation

Optimization

117

301 phones, IP_500 parameters affect SoundPoint

IP 500 and 501 phones and

IP_600 parameters affect SoundPoint

IP 600 and 601 phones.

4.6.1.17.2 Patterns <Patterns/>

This section defines patterns for the LED indicators. In the following table,

is the

pattern number,

is the step in the pattern.

4.6.1.17.3 Classes <Classes/>

This section defines the available classes for the LED and graphical icon indicator
types. In the following table,

is the class number,

is the identifier of the state num-

ber for that class.

Attribute

Permitted Values

Interpretation

ind.anim.x.y.frame.z.bitmap

A bitmap name
defined previously.

Bitmap to use.

Note that it must be defined already, see
4.6.1.16.1 Platform <IP_300/>, <IP_500/
>, <IP_600/> and <IP_4000/> on
page 116.

ind.anim.x.y.frame.z.duration

positive integer

Duration in milliseconds for this step.
0=infinite.

Attribute

Permitted

Values

Interpretation

ind.pattern.x.step.y.state

On or Off

Turn LED on or off for this step.

ind.pattern.x.step.y.duration

positive integer

Duration in milliseconds for this step. 0=infinite

ind.pattern.x.step.y.colour

Red or Green
(default is Red
if not specified)

For bi-color LEDs, specify color.

Attribute

Permitted

Values

Interpretation

ind.class.x.state.y.index

positive integer

For LED type indicators, index refers to the pattern
index, such as index x in the <Patterns/> tag above.

For GraphicIcon type indicators, index refers to the
animation index, such as index y in the <Anima-
tions/> tag above.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands