Polycom SoundPoint IP 500 Administrator'S Manual Download Page 83

Page: 83 / 166

Administrator Guide - SoundPoint

IP / SoundStation

Optimization

4.6.1.1.3.3 Request Validation <requestValidation/>

Attribute

Permitted Values

Default

Interpretation

voIpProt.SIP.requestValida-
tion.x.request

One of:
“INVITE”,
“ACK”, “BYE”,
“REGISTER”,
“CANCEL”,
“OPTIONS”,
“INFO”,

“MESSAGE”,
“SUB-
SCRIBE”,
“NOTIFY”,
“REFER”,
“PRACK”, or
“UPDATE”

Null

Sets the name of the method
for which validation will be
applied

a. WARNING: Intensive request validation may have a negative performance impact due to

the additional signaling required in some cases, therefore, use it judiciously.

voIpProt.SIP.requestValida-
tion.x.method

Null or

one of: “source”,
“digest” or
“both”/”all”

Null

If Null, no validation is done.
Otherwise this sets the type of
validation performed for the
request:

source

: ensure request is

received from an IP address
of a server belonging to the
set of target registration serv-
ers;

digest:

challenge requests

with digest authentication
using the local credentials for
the associated registration
(line);

both

all

: apply both of the

above methods

voIpProt.SIP.requestValida-
tion.x.request.y.event

A valid string

Null

Determines which events
specified with the Event
header should be validated;
only applicable when voIp-
Prot.SIP.requestValida-
tion.x.request is set to
“SUBSCRIBE” or
“NOTIFY”.

If set to Null, all events will
be validated.

voIpProt.SIP.requestValida-
tion.digest.realm

A valid string

PolycomSPIP

Determines string used for
Realm.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands