Polycom SoundPoint IP 500 Administrator'S Manual Download Page 165 | Manualshive

Page: 165 / 166

background image

Administrator Guide - SoundPoint

®

IP / SoundStation

®

IP

Appendix 2

Copyright © 2005 Polycom, Inc.

157

the following acknowledgement: "This product includes cryptographic software writ-
ten by Eric Young ([email protected])"

The word 'cryptographic' can be left out if the routines from the library being used are
not cryptographic related.

4. If you include any Windows specific code (or a derivative thereof) from the apps
directory (application code) you must include an acknowledgement: "This product
includes software written by Tim Hudson ([email protected])"

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABIL-
ITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAM-
AGE.

The licence and distribution terms for any publicly available version or derivative of
this code cannot be changed. i.e. this code cannot simply be copied and put under
another distribution licence [including the GNU Public Licence.]

zlib:

(C) 1995-2002 Jean-loup Gailly and Mark Adler

This software is provided 'as-is', without any express or implied warranty. In no event
will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including com-
mercial applications, and to alter it and redistribute it freely, subject to the following
restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you
wrote the original software. If you use this software in a product, an acknowledgment
in the product documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepre-
sented as being the original software.

3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]

«
...
163
164
165
166
»

Summary of Contents for SoundPoint IP 500







































































































































































Reviews:

No comments

Related manuals for SoundPoint IP 500

Brand: VCON Pages: 48

Brand: Sagem Pages: 97

Brand: Sagem Pages: 99

Brand: Sagem Pages: 99

Brand: Sagem Pages: 89

Brand: UMX Pages: 56

TracFone SGH-T155G Series

Brand: Samsung Pages: 56

TracFone SGH-T245G

Brand: Samsung Pages: 88

Trender SPH-M380

Brand: Samsung Pages: 192

Brand: Archos Pages: 40

Brand: TCL Pages: 10

Brand: Sennheiser Pages: 1

Brand: Allview Pages: 82

Brand: Symetrix Pages: 4

Brand: AKUA Pages: 34

Brand: NEO Pages: 61

Polycom VSX 5000

Brand: MBTelehealth Pages: 14

Brand: Geemarc Pages: 69

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands