Polycom SoundPoint IP 500 Administrator'S Manual Download Page 166 | Manualshive

Page: 166 / 166

background image

Administrator Guide - SoundPoint

®

IP / SoundStation

®

IP

Appendix 2

158

Copyright © 2005 Polycom, Inc.

Expat:

Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark
Cooper

Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and associated documentation files (the "Software"), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit per-
sons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies
or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-
POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHER-
WISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

curl:

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1996 - 2004, Daniel Stenberg, <[email protected]>.

All rights reserved.

Permission to use, copy, modify, and distribute this software for any purpose with or
without fee is hereby granted, provided that the above copyright notice and this per-
mission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR-
POSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CON-
NECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in
advertising or otherwise to promote the sale, use or other dealings in this Software
without prior written authorization of the copyright holder.

«
...
164
165
166

Summary of Contents for SoundPoint IP 500







































































































































































Reviews:

No comments

Related manuals for SoundPoint IP 500

Brand: WatchOvers Pages: 10

DigiWalker A701

Brand: Mio Pages: 168

Brand: Dotel Pages: 37

Brand: SoftBank Pages: 2

Brand: M2M Pages: 2

Brand: Palm Pages: 54

Brand: NGM Pages: 148

Brand: Verizon Pages: 10

Brand: IPRO Pages: 53

Brand: Wherify Pages: 37

Brand: LOBSTER Pages: 75

Brand: Hitachi Pages: 61

Brand: Bosch Pages: 23

Brand: Nokia Pages: 34

Brand: Huawei Pages: 24

Brand: Zte Pages: 65

Warp Elite N9518

Brand: Zte Pages: 73

Brand: Zte Pages: 157

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands