Polycom SoundPoint IP 500 Administrator'S Manual Download Page 124

Page: 124 / 166

Administrator Guide - SoundPoint IP / SoundStation

Optimization

116

4.6.1.16.1 Platform <IP_300/>, <IP_500/>, <IP_600/> and
<IP_4000/>

In the following table,

=IP_300, IP_500, IP_600, or IP_4000 and

is the bitmap

number. Note that IP_300 parameters affect SoundPoint

IP 300 and 301 phones,

IP_500 parameters affect SoundPoint

IP 500 and 501 phones and IP_600 parameters

affect SoundPoint

IP 600 and 601 phones.

4.6.1.17 Indicators <indicators/>

Indicators (graphic icons, animations, and LED patterns) used by the phone are
defined in this section.

4.6.1.17.1 Animations <Animations/> <IP_300/>, <IP_500/>,
<IP_600/> and <IP_4000/>

This section defines bitmap animations composed of bitmap/duration couples. In the
following table,

=IP_300, IP_500, IP_600 or IP_4000,

is the animation number,

the step in the animation. Note that IP_300 parameters affect SoundPoint

IP 300 and

Attribute

Permitted Values

Interpretation

bitmap.x.y.name

The name of a bit-
map to be used.

This is the name of a bitmap to be used for creating an
animation. If the bitmap is to be downloaded from the
boot server, its name must:

1. Be different from any name already in use in

sip.cfg.

2. Match the name of the corresponding <file-

Name>.bmp to be retrieved from the boot server.

Attribute

Permitted
Values

Default

Interpretation

ind.idleDisplay.enabled

0, 1

If set to 1, the idle display may support pre-
sentation of a custom animation if config-
ured properly in the animation section of
sip.cfg.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands