Polycom SoundPoint IP 500 Administrator'S Manual Download Page 50

Page: 50 / 166

Administrator Guide - SoundPoint

IP / SoundStation

Features

3.2 Call Management Features

3.2.1 Automatic Off-hook Call Placement

The phone supports an optional automatic off-hook call placement feature for each
registration.

Central
(boot
server)

Configuration file:
sip.cfg

To turn idle display animation on or off.

•

For more information, see 4.6.1.17 Indicators
<indicators/> on page 116.

To replace the animation used for the idle display.

•

For more information, see 4.6.1.17.1 Animations
<Animations/> <IP_300/>, <IP_500/>, <IP_600/>
and <IP_4000/> on page 116.

To change the position of the idle display animation.

•

For more information, see 4.6.1.17.4.2 Graphic
Icons <gi/> <IP_300/>, <IP_500/>, <IP_600/> and
<IP_4000/> on page 118.

Local

Web Server
(if enabled)

None.

Local Phone User
Interface

None.

Central
(boot
server)

Configuration file:
phone1.cfg

Specify which registrations have the feature and what
contact to call when going off hook.

•

For more information, see 4.6.2.2.2 Automatic Off-
hook Call Placement <autoOffHook/> on page 131.

Local

Web Server
(if enabled)

None.

Local Phone User
Interface

None.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands