Administrator Guide - SoundPoint
®
IP / SoundStation
®
IP
Installation and Operation
Copyright © 2005 Polycom, Inc.
17
2.2.2.2 Local Phone Configuration
As the only method of modifying phone configuration or as a distributed method of
augmenting a centralized provisioning model, a local phone-based configuration web
server is available, unless disabled via sip.cfg. For more information, see 4.6.1.11
Web Server <HTTPD/> on page 107. The phone’s local user interface also permits
6. Reboot phones after configuring
their boot server via DHCP or stati-
cally:
See 2.2.1 Basic Network Setup on page 4.
To reboot phones, a menu option can be selected or a
key combination can be held down. The menu option
is called Restart Phone and it is in the Settings menu.
For the key combination, press and hold the following
keys simultaneously until a confirmation tone is heard
or for about three seconds:
IP 300 & IP 301: Volume-, , Hold and Do
Not Disturb
IP 500 & IP 501: Volume-, , Hold, and Mes-
sages
IP 600 & IP 601: Volume-, , Mute, and Mes-
sages
IP 4000: *, #, , and Select
Monitor the boot server event log and the uploaded
event log files (if permitted):
Ensure that the configuration process completed cor-
rectly.
Start making calls!
a. If the provisioning protocol requires an account name and password, the server account
name and password must match those configured in the phones. Defaults are: provisioning
protocol: FTP, name: PlcmSpIp, password: PlcmSpIp
b. This step may be omitted if per-phone configuration is not needed.
Step:
Instructions: