Polycom SoundPoint IP 500 Administrator'S Manual Download Page 49

Page: 49 / 166

Administrator Guide - SoundPoint

IP / SoundStation

Features

received to indicate that they are not accurate. The time and date display can use one
of several different formats and can be turned off.

3.1.28 Idle Display Animation

All phones except the SoundPoint

IP 300 and SoundPoint

IP 301 can display a cus-

tomized animation on the idle display in addition to the time and date. For example, a
company logo could be displayed.

Central
(boot
server)

Configuration file:
sip.cfg

Turn time and date display on or off.

•

For more information, see 4.6.1.4 User Preferences
<user_preferences/> on page 82.

Set the time and date display formats.

•

For more information, see 4.6.1.3.2 Date and Time
<datetime/> on page 81.

Set the basic SNTP settings and daylight savings param-
eters.

•

For more information, see 4.6.1.10.2 Time Syn-
chronization <SNTP/> on page 104.

Local

Web Server
(if enabled)

Set the basic SNTP and daylight savings settings.

Navigate to: http://<phoneIPAddress>/coreConf.htm#ti

Changes are saved to local flash and backed up to
<

Ethernet address

>-phone.cfg on the boot server. They

will permanently override global settings unless deleted
via the Reset User Settings menu selection.

Local Phone User
Interface

The basic SNTP settings can be made in the Network
Configuration menu.

•

For more information, see 2.2.1.1 DHCP or Manual
TCP/IP Setup on page 5.

The user can edit the time and date format and enable or
disable the time and date display under the Settings
menu.

Changes are saved to local flash and backed up to
<

Ethernet address

>-phone.cfg on the boot server. They

will permanently override global settings unless deleted
via the Reset User Settings menu selection.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands