Polycom SoundPoint IP 500 Administrator'S Manual Download Page 110

Page: 110 / 166

Administrator Guide - SoundPoint IP / SoundStation

Optimization

102

4.6.1.8.10 Voice Activity Detection <VAD/>

These settings control the performance of the voice activity detection (silence suppres-
sion) feature.

4.6.1.9 Quality of Service <QOS/>

These settings control the Quality of Service (QOS) options.

4.6.1.9.1 Ethernet IEEE 802.1p/Q <Ethernet/>

These settings control the 802.1p/Q user_priority field.

4.6.1.9.1.1 RTP <RTP/>

These parameters apply to RTP packets.

4.6.1.9.1.2 Call Control <CallControl/>

These parameters apply to call control packets, such as the network protocol signaling.

Attribute

Permitted
Values

Default

Interpretation

voice.vadEnable

0, 1

If set to 1, enable VAD.

voice.vadThresh

integer from
0 to 30

The threshold for determining what is active
voice and what is background noise in dB. This
does not apply to G.729AB codec operation
which has its own built-in VAD function.

Attribute

Permitted
Values

Default

Interpretation

qos.ethernet.rtp.user_priority

0-7

User-priority used for RTP packets.

Attribute

Permitted
Values

Default

Interpretation

qos.ethernet.callControl.user_priority

0-7

User-priority used for call con-
trol packets.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands