Polycom SoundPoint IP 500 Administrator'S Manual Download Page 111

Page: 111 / 166

Administrator Guide - SoundPoint

IP / SoundStation

Optimization

103

4.6.1.9.1.3 Other <Other/>

These default parameter values are used for all packets which are not set explicitly.

4.6.1.9.2 IP TOS <IP/>

These settings control the “type of service” field in outgoing packets.

4.6.1.9.2.1 RTP <RTP/>

These parameters apply to RTP packets.

Attribute

Permitted
Values

Default

Interpretation

qos.ethernet.other.user_priority

0-7

User-priority used for packets that
do not have a per-protocol setting.

Attribute

Permitted
Values

Default

Interpretation

qos.ip.rtp.min_delay

0, 1

If set to 1, set min-delay bit in
the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.max_throughput

0, 1

If set to 1, set max-throughput
bit in the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.max_reliability

0, 1

If set to 1, set max-reliability
bit in the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.min_cost

0, 1

If set to 1, set min-cost bit in
the IP TOS field of the IP
header, or else don’t set it.

qos.ip.rtp.precedence

0-7

If set to 1, set precedence bits
in the IP TOS field of the IP
header, or else don’t set them.

Summary of Contents for SoundPoint IP 500


































































































































































Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands

Polycom SoundPoint IP 500, Administrator'S Manual

Search results

Summary of Contents for SoundPoint IP 500

Reviews:

Related manuals for SoundPoint IP 500

Brands by name

Popular brands