PS-4660TW
Installation Guide
P. 27
Caution!!!
When installing the Starter Kill, it is extremely important that pin 86 be wired to Ignition: do not
jump it to pin 30 (damage to the vehicle could result).
Note:
Installation of the Starter Kill system requires an external relay.
(Not included!)
Passive or Active Arming
The Remote Car Starter can be set to:
•
Active Arming
: the Starter Kill will
not
arm automatically. Press the
LOCK
button to
arm and the
UNLOCK
button to disarm it.
•
Passive Arming:
the Starter Kill will arm automatically if it is not armed by remote
within a 60-sec. delay. Press
UNLOCK
to disarm.
•
Passive Arming
with 3-minute timeout: the Starter Kill will arm automatically after
3 minutes.
Resetting the Remote Car Starter
The Remote Car Starter is equipped with a reset function that allows the installer to
erase all Transmitter codes from memory and return all the Programming Options to the
factory default values.
Resetting the Remote Car Starter is not a required process. Most of the time, you can
avoid resetting by fixing the issue directly at the root of the cause.
1.
Flash the Hood Pin switch (see Table 1)
– Once inside Programming Mode, you have 10 seconds to complete the next step.
2.
Press and release the Break Pedal 6 times (within 10 seconds from entering
Programming Mode).
3.
The
Parking Lights will flash 8 times
to confirm resetting.
Table 12
Resetting without a Valet Button
On some vehicles (such as BMW and certain Volkswagen vehicles), resetting will not
work if the Brake Pedal is pressed while the Ignition Key is
not
in the
IGNITION ON (RUN)
position: you will need therefore to hot-wire the Brake Pedal by manually jumping 12 V
with a fused test lead at the Brake Pedal switch.
1.
Flash the Hood Pin switch (see Table 1)
– Once inside Programming Mode, you have 10 seconds to complete the next step.
2.
Press and release the Valet Button 6 times or more until the Parking Lights start to
flash.
3.
The
Parking Lights will flash 8 times
to confirm resetting.
Table 13
Resetting with the Valet Button
Events Logging
With this feature, the remote car starter will play back the last 4 start failure events codes
via the parking lights or L.E.D.
