PS-4660TW
Installation Guide
P. 3
Introduction
This guide contains all the information relevant and necessary for the installation of the
module. Most of the features of this product are explained in the user guide. Therefore, if
you need detailed information about a feature of the product, we recommend that you
refer to the user guide.
Included in the Kit
Please carefully read the installation guide before beginning the installation, especially
the harness description section and the programming options.
It is very important that you familiarize yourself with the programming and the operation
of the module, even if you have already installed a similar module in the past. There are
many innovative features that you may overlook if you do not read this guide.
Prior to the installation, make sure that all the hardware components required to install
the system are in the box.
The following is a list of components included in the kit:
1 – Remote starter control unit
1 – FM long-range transceiver
1 – Antenna interconnect cable
1 – Multi-channel 5-button remote control
1 – Six-pin 14 AWG harness (ignition harness)
1 – Five-pin 18 AWG harness (main harness)
1 – Twelve-pin 22 AWG harness (accessories harness)
1 – Two-pin 22 AWG harness (accessories harness)
1 – Parts bag: a hood pin-switch, a connector and a warning label
1 – User guide
The plug-in valet button is not included with this module.
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power
(EIRP) is not more than that required for successful communication.
FCC USER NOTICE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorised modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.
