Programming Options
MODE 1
* INDICATES DEFAULT SETTING
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1*
Ignition Lock DISABLED
OPTION 2
Ignition Lock ENABLED
OPTION 3
Ignition UNLOCK ONLY
OPTION 4
Ignition LOCK ONLY
FUNCTION 2 – Secure Lock
OPTION
1* Secure Lock DISABLED (1-sec. Disarm
pulse)
OPTION 2
Secure Lock ENABLED in Smart Secure Lock
Mode
OPTION 3
Secure Lock DISABLED (1/2-sec. Disarm
pulse)
OPTION 4
Secure Lock ENABLED in Standard Mode
OPTION 5
Secure Lock (no rearm pulse when ignition and
the ground out when running are ON)
FUNCTION 3 – Starter Kill Passive / Active Arming
OPTION 1*
PASSIVE Arming (60 sec.)
OPTION 2
ACTIVE Arming
OPTION 3
PASSIVE Arming (3 min.)
FUNCTION 4 – Door lock pulse timing
OPTION 1*
7/10-sec. lock/unlock pulses
OPTION 2
4-sec. lock/unlock pulses
OPTION 3
7/10-sec. lock pulse and two 1/4-sec. unlock
pulses
OPTION 4
1/10-sec. lock/unlock pulses
FUNCTION 5 – LED flashing
OPTION 1* ENABLED (without starter kill
Æ
will flash
only when ignition is OFF)
OPTION 2
DISABLED
OPTION 3
ENABLED (with starter kill
Æ
will flash when
the starter kill engages. This option should be
selected ONLY if the starter kill is installed.)
MODE 2
* INDICATES DEFAULT SETTING
FUNCTION 1 – Safe Start.
OPTION 1
Safe Start ENABLED
OPTION 2*
Safe Start DISABLED
OPTION 3
“Swap Start” – enhanced Safe Start Mode with
extended safety:
To start the Engine: press the SHIFT button and
then the LOCK button. To trigger AUX 2: press
the START/STOP button. Must have
configured option 1 or option 2 in mode 3
function 3.
FUNCTION 2 – Engine Run Time
OPTION 1
Run Time = 4 minutes in GAS mode / 9 minutes
DIESEL mode
OPTION 2* Run Time = 15 minutes in GAS mode / 20
minutes DIESEL mode
OPTION 3
Run Time = 25 minutes in GAS mode / 30
minutes DIESEL mode
FUNCTION 3 – Turbo Mode
OPTION 1
Turbo Mode ENABLED
OPTION 2*
Turbo Mode DISABLED
OPTION 3
Turbo Mode ENABLED
FUNCTION 4 – Engine type and Cold Weather Mode
OPTION 1
30-sec delay diesel mode with 20-minute run
time in cold weather mode
OPTION 2*
1-sec delay gas mode with 4-minute run time
in cold weather mode
OPTION 3
7-sec delay diesel mode with 9-minute run time
in cold weather mode
OPTION 4
15-sec delay diesel mode with 9 minute run
time in cold weather mode
FUNCTION 5 – Ignition Valet
OPTION 1
Ignition Valet DISABLED
OPTION 2*
Ignition Valet ENABLED
OPTION 3
Ignition Valet ENABLED
MODE 3
* INDICATES DEFAULT SETTING
FUNCTION 1 – Home Valet
TM
OPTION 1
Home Valet ENABLED
OPTION 2*
Home Valet DISABLED
OPTION 3
Home Valet DISABLED
FUNCTION 2 – AUX 3 / Zone 3 Programming
OPTION 1
1-sec. output when Trunk button is pressed for
3 sec. with Ignition OFF or under remote run
OPTION 2* Constant output while the TRUNK button is
pressed
OPTION 3
Disarm and rearm pulses with trunk
FUNCTION 3 – AUX 2 Programming
OPTION 1
Constant output while pressing SHIFT followed
by LOCK.
In Safe Start Mode: activate AUX 2 by pressing
the START/STOP button.
OPTION 2*
Toggle ON/OFF (with 30-second timeout)
OPTION 3
Horn confirmation when pressing the LOCK
button
OPTION 4
Priority Door Access
FUNCTION 4 – External Trigger
OPTION 1
Zone 3 disarm/rearm (Trunk Pin: a disarm pulse
is sent before the Trunk
opens, the vehicle rearms 4 seconds after the
Trunk is closed).
OPTION 2*
Engine Start/Stop
OPTION 3
Key Sense
MODE 4
* INDICATES DEFAULT SETTING
FUNCTION 1 – Multi-Level Features
OPTION 1
Multi-car Features, Basic Features, Customized Features
OPTION 2*
Basic Features, Multi-car Features, Customized Features
OPTION 3
Customized Features, Multi-car Features, Basic Features
OPTION4
Basic Features, Customized Features, Multi-car Features
PS-4660TW
Programming Options and Wiring Diagram
