Planmeca ProMax Pan/Ceph, Calibration Manual

Page: 4 / 100

- 4 -
Chapter G: Ball Phantom
1. Setting up for a Ball Phantom 39
2. Setting up the Computer 41
2.1 Calibrating / measuring image 41
2.1.a. Center Ball 43
2.1.a.i Too Thin 44
2.1.a.ii Too Fat 46
2.1.b 10
th
Ball 48
2.1.b.i Too Left 48
2.1.b.ii Too Right 49
2.1.b.iiiMoving the Table 49
2.1.c Shadow Ball 50
2.1.c.i Too Left/Right 53
3. Position Sensor Calibration (Pots) (64.0) 54
3.1 Aligning Pots 56
3.1.a Shoulder 56
3.1.b Elbow 57
3.1.c C-Arm 58
4. Patient Positioning Lights Alignment 59
4.1 Focal Layer Light Beam 61
4.2 Frankfort Light Beam 62
4.3 Midsagittal Light Beam 62
Chapter H: Cephalometric
1. Getting into Cephalometric Mode 63
2. Removing Cephalometric Covers 64
2.1 Top Covers 64
2.2 Secondary Collimator Covers 66
3. Beam Alignment 67
3.1 Ceph Mode C-arm Rotation 68
3.1.a Ceph Mode Beam Right Position 70
3.1.a.i Too Left/Right 70
3.1.b Ceph Mode C-arm Rotation 72
3.1.b.i Too Left/Right 72
3.2 Ceph Mode Beam Position 74
3.2.a Too Left/Right 75
3.3 Ceph y-collimator calibration 76
3.3.a Too High 77
3.3.b Too Low 78
4. Ceph Head Leveling 78
4.1 Too Left 81
4.2 Too Right 82
4.3 Too Low 83
4.4 Too High 83
5. Secondary Collimator (Beaver Tail) 84
5.1 Too Left 85
5.2 Too Right 87
5.3 Too Low 88
5.4 Too High 89
Printed copies of this document are considered uncontrolled.
22811.20.Rev001 07.31.2018
4