4. Set the offset value from the top edge of the envelope. The offset range from the top of the
envelope is 0.24 to 0.51 inch (6 to 13 mm).
a. Select the + or - button once to increase/decrease the value by 0.05 inch (or 1 mm).
b. To continue increasing/decreasing the value hold the + or - button for at least 2 seconds. For
each second you hold the button, the value increases/decreases by 0.1 inch (10mm).
5. Set the offset value from the right edge and left edge of the envelope using the same method
used for setting the top edge offset. The right margin offset range is 0.06 to 1.0 inch (1.52 to 25.4
mm).
6. The left margin offset range is 0.00 to 0.5 inch (0 to 12.7 mm)
Note:
The offset values are dependent on the country.
7. Select
OK
when done.
Changing the color print quality
This option is only available if your system has color capability.
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select anywhere within envelope on the screen.
3. Select the color
print quality
option from the list box on the left of the Edit envelope screen.
4. Select the color ink print quality setting:
l
Good
l
Better
l
Best (slowest printing speed)
5. Select the Envelope material.
l
Regular Wove
l
Recycled
l
Glossy (requires the most drying time)
Running mail
Pitney Bowes
Operator Guide
April 2022
84
