l
If you set the threshold too low, you may be prompted to return a piece of mail to the scale. This
will happen if the weight cannot be recorded properly due to bounce on the scale.
Tip:
Weigh the lightest piece of mail in the stack and set a threshold
below
that value.
To edit the Differential weighing threshold:
1. Ensure that the appropriate job is open and selected on the Run Mail screen.
2. Select the
Weighing
icon.
3. Select
Differential weighing
.
4. Select
Edit threshold
.
5. Type in the appropriate threshold.
6. Select
OK
. The system returns you to the weighing method dialog box.
7. Select
OK
to return to the Run Mail screen.
Using Key in Postage mode
You can manually enter postage for any of your postal jobs. This is called Key in Postage.
Note:
You cannot save any job that uses key in postage as the
default
job. The default job must have a
class selection so it will be automatically updated when postage rates change.
1. Select the
Run Mail
button on the Home screen.
2. Ensure that the appropriate job is open.
3. Select
Key in Postage
at the bottom of the screen.
4. Type in the postage amount and select
OK
.
Running mail
Pitney Bowes
Operator Guide
April 2022
63