Piper Cherokee LANCE, Service Manual

Page: 89 / 854

PIPER CHEROKEE SIX / LANCE SERVICE MANUAL
03/27/08 IV - STRUCTURES
1E5
4-5. WING FLAPS.
CAUTION: CONTROL SURFACE SKINS MUST BE REPLACED IF THEY SUSTAIN DAMAGE
OR EXHIBIT CRACKS.
a. Removal:
1. Remove the access plate at the wing butt rib.
2. Disconnect the flap push rod.
3. Remove the three hinge bolts.
4. Pull the flap straight back off the wing.
b. Install the flap in reverse of removal instructions.
4-6. AILERON.
CAUTION: CONTROL SURFACE SKINS MUST BE REPLACED IF THEY SUSTAIN DAMAGE
OR EXHIBIT CRACKS.
a. Removal:
1. Disconnect the aileron push rod at the inboard end of the aileron.
2. Remove the eight bolts which hold the aileron to the wing assembly.
3. Remove the aileron by lowering the inboard end first, then swing forward so the balance
assembly will clear the outboard portion of the wing.
WARNING: ALL CONTROL SURFACES THAT HAVE BEEN REPLACED OR REPAINTED MUST
BE BALANCED BEFORE INSTALLATION PER INSTRUCTIONS IN BALANCING,
BELOW.
b. Install the aileron in reverse of removal instructions.