Piper Cherokee LANCE, Service Manual

Page: 754 / 854

PIPER CHEROKEE SIX / LANCE SERVICE MANUAL
III - INSPECTION 03/27/08
4C20
TABLE III-I. INSPECTION REPORT - PA-32-260/300 (cont.)
Inspection
NATURE OF INSPECTION Interval (Hrs)
50 100
C. CABIN AND COCKPIT GROUP (CONT.)
7. Inspect trim control operation ............................................................................... O
8. Inspect condition and operation of rudder pedals and
rudder bar assembly. (See Note 18.) .....................................................................
O
9. Inspect parking brake valve and brake handle for operation
and cylinder leaks ..................................................................................................
O
10. Inspect control wheels, column, pulleys, cables, turnbuckles, and fittings.
(See Notes 10 and 21.) .......................................................................................... O
11. Perform Flap Control Cable Attachment Bolt Inspection.
(See Special Inspections, Procedures, and Note 10.) ............................................ O
12. Inspect landing, navigation, strobe, cabin, and instrument lights for operation,
condition, and security .......................................................................................... O O
13. Inspect instruments, avionics, lines, and attachments ........................................... O
14. Inspect gyro-operated instruments and electric turn and bank.
Overhaul or replace as required ............................................................................ O
15. Replace vacuum regulator filter ............................................................................ O
16. Inspect static system, altimeter and transponder for installation/certification
per latest revision of AC 43.13-1 and current test/inspection per
FAR’s 91.411 and 91.413, respectively ................................................................
O
17. Inspect and test ELT per FAR 91.207. (See Testing ELT, Section XI.) ................. O
18. Inspect operation of fuel selector valve. (See Note 29.) ....................................... O
19. Inspect fuel valve drain lever cover for security. Verify door opens
and closes freely and prevents operation of lever when closed ............................ O O
20. Inspect condition of heater controls and ducts ...................................................... O
21. Inspect condition and operation of air vents ......................................................... O
22. If installed, inspect condition of air conditioning ducts ........................................ O
23. If installed, remove and clean air conditioning evaporator filter .......................... O
24. If installed, inspect portable fire extinguisher minimum weight as
specified on nameplate .......................................................................................... O
D. FUSELAGE AND EMPENNAGE GROUP
1. Remove inspection plates and panels..................................................................... O
2. Inspect aft wing attach fittings per Aft Wing Attach Fittings 100
Hour Inspection. (See Special Inspections, Procedures.).......................................
O
3. Inspect fwd baggage door, latch, and hinge for damage, operation
and security ............................................................................................................
O O
4. Inspect battery, box, and cables. Flush and clean area as required and fill battery
per instructions on box and in Electrical System, Section X .................................
O O
5. Inspect electronic installations for condition and security..................................... O
6. Inspect skins, bulkheads, frames, and stringers for damage,
irregularities, or structural defects (i.e. - skin cracks, distortion, dents,
corrosion and loose or missing rivets) ..................................................................
O