Overview
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
| 9
PSENvip is part of an overall system comprising:
}
Press brake
}
Numerical controller (CNC) with web interface for visualisation and operation
}
PSENvip transmitter and PSENvip receiver
}
Control system PSSuniversal PLC from the automation system PSS 4000 with special
module PSSu K F FAU
}
PAS4000 user program
Monitor
PSSu K F FAU
Control cabinet
Press brake
Web Interface
Control system
PSSuniversal
Transmitter
PSSu K F FAU
Upper die
Receiver
Upper tool
Lower tool
Detection zone
Transmitter
Fig.: Whole system
If the detection zone between transmitter and receiver is interrupted, the PSSu K F FAU
can shut down the safety outputs immediately. The outputs that are shut down are defined
in the PAS4000 user program.
There are 2 versions available for protected field monitoring:
}
The base version monitors a fixed, configured protected field.
}
The productive version monitors a dynamic protected field.
PSENvip automatically detects a tool contour. The adjustment during initial commissioning
or during a tool change is made using the web interface on the CNC.
