PIKO SmartMeasure Car, Instruction Manual

Page: 47 / 96

47
7.4. Further Information
7.4.1 The PIKO SmartMeasure Car can run for app. 3 hours* without recharging the battery
*with WiFi off; with WiFi on app.2 hours
7.4.2 When the PIKO SmartMeasure Car is not powered via the track and not moved it will turn off app. after 3 minutes.
7.4.3 The PIKO SmartMeasure Car can be charged with digital voltage and analogue voltage*. In analogue operation it needs around 6 V
(or higher) to start charging.
*only on DC tracks
7.4.4 To connect the PIKO SmartMeasure Car with a computer it needs a USB data cable*. The battery will also be charged when connected to
a USB hub.
*not included / needed wire type “USB Micro-Type B”
8. Important notice:
It is not allowed to use AC wheel sets!
9. Legend
WiFi – Wireless communication network
DCC – Digital Command Control
to sniff / Sniffer – Somebody or something listening – in this case the car will listen to an assigned DCC locomotive address (see chapter “Loco
Address”)
to toggle – automatic function to assign a new „Sniffer address“ of a locomotive (here: use F0 to assign new address; see chapter „Auto
Loco Address”)
10. Spare parts
You can find the spare part list of the PIKO SmartMeasure Car on a separate sheet.
Minimum recommended radius
Lenght over buffers
Close coupling
WLAN-capable
with USB port
with data storage
min.
358
min.
415
:/$1 86%
:/$1 86% :/$1 86%
2017-09-21 Bed. Anleitung Messwagen_55050-90-7001.indd 47 21.09.17 16:56