33
3.1 Start up of the Car
The PIKO SmartMeasure Car can be activated by pushing a button or it will turn on automatically when voltage on the track* is registered.
To activate the PIKO SmartMeasure Car with a button press any button for one second.
*not available on AC tracks
3.2 The display side
3.2.1 The display symbols
The display shows the actual measurement, it’s value and possible activated functions,
f.e. like „test run active“.
The chosen functionality may also be signalized with the LEDs on the opposite side.
Explaination of the symbols – upper status bar (from left to right):
1. Track signal – analogue
or digital
2. Data storage / memory – no test run
or „test run active“
3. USB status – connection active
or no connection available
4. WiFi status – WLAN on
oder off
5. battery status – displayed condition corresponds with charging status
2017-09-21 Bed. Anleitung Messwagen_55050-90-7001.indd 33
21.09.17 16:56
Summary of Contents for SmartMeasure Car
Page 24: ...24 2017 09 21 Bed Anleitung Messwagen_55050 90 7001 indd 24 21 09 17 16 56...
Page 48: ......
Page 72: ......
