37
4.1 Functions on the main page
4.1.1 Change displayed unit
By Touching „Speed“ or „Distance“ the unit can be changed, f.e. from cm/s to m/s.
When touching the „Distance“ area for some time you can also reset the distance to zero.
4.1.2 Show more or less measurements
Via „Displayed Data“ in the settings menu you can choose which data should be displayed on the main page.
4.1.3 Arrows left and right
By touching those arrows you can switch through the displayed screens of the car.
4.2 Settings menu
Via „Setup“ button on the main page you can do some basic settings.
4.2.1 Unit format
Here you can choose between US-units and metric units. By default the setting is metric units.
4.2.2 DCC Address
With this menu you can assign a DCC address* to the car.
By default the address is “50”.
When the car is used on a digital DC-track following functions are possible via the command station:
F0 on – switches off the display of the car
F1 – switch to next display on the left (at the car’s display)
F2 – switch to next display on the right (at the car’s display)
*short and long DCC addresses can be entered.
2017-09-21 Bed. Anleitung Messwagen_55050-90-7001.indd 37
21.09.17 16:56
Summary of Contents for SmartMeasure Car
Page 24: ...24 2017 09 21 Bed Anleitung Messwagen_55050 90 7001 indd 24 21 09 17 16 56...
Page 48: ......
Page 72: ......
