phytron
11
MA 2102-A005 GB
The ServiceBus mode allows configuration and programming via PC by software
ServiceBus-Comm
®
for Windows
®
.
The step resolution can be programmed up to 1/512 step, the current delay time and the
phase current in 100 mA steps.
The operating parameters are unconditionally set, i.e. the preset values are accepted
without
Reset.
Exception:
The step resolution must be confirmed by Reset!
1.5.3 Bus Mode Exclusive
The Bus mode exclusive ensures safe operation in ServiceBus mode. If the power stage
is set to Bus mode exclusive in ServiceBus mode by ServiceBus-Comm
®
, all rotary switch
settings are ignored.
1.6 LED
Bi-colour
LED
Meaning
green
Ready
LED is shining permanently:
The MCD power stage is ready to operate and
energized.
LED is blinking by second cycle (0.5 Hz):
Power stage is deactivated
red
Fault
Error in MCD:
Overcurrent/Short circuit:
LED is shining permanently
Undervoltage:
LED is blinking by second cycle (0.5 Hz)
Overtemperature:
LED is blinking fast (2 Hz)
