phytron
A5 Current Shaping CS
Current Shaping (CS) is a circuitry method for delivering a true phase current which
corresponds for a wide range of frequencies to a selected current shape.
If the stepper motor is driven without CS, the true current differs from the specified current,
even in the lower speed frequencies.
The 1/20 sine wave mode results in a current deviation as shown in fig. 37, for average
speed:
Fig. 37:
Current Shaping CS
These typical deformations can be observed for all types of curves. They are caused by
the stepper motor inductance and the generator feedback which increases with the motor
speed.
The resulting ‚current queue’ makes precise current regulation possible by Current
Shaping (CS= 4 quadrant current regulation), only. The amplitude of the ‚current queue’
varies strongly remarked during one revolution and may provoke a motor resonance effect
which causes step losses or desynchronization of the motor.
If the CS function is activated, the ‚current queue’ disappears and the resulting current is
close to the ideal shape.
We recommend to use CS in higher current and speed frequency ranges.
In ServiceBus mode CS can be activated by a button in ServiceBus-Comm
®
.
51
MA 2102-A005 GB
