Phytec phyCORE-P87C591, Quick Start Instructions

Page: 78 / 84

phyCORE-P87C591 QuickStart Instructions
74
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
•
Download the created Debug.hex file (located in
C:\PHYBasic\pC-P87C591\Demos\Raisonance\Debug) to the
Flash memory. For general download procedure information refer
to sections 2.2 through 2.4.
•
Press the Reset button S2 on the Development Board to start the
program.
•
The application is now waiting for receipt of a known character
over the serial interface. Start the HyperTerminal program and
push the <Space> bar as described in section 2.4.2. This starts the
automatic baud rate detection. Now you can watch your final
debug example execute.