Phytec phyCORE-P87C591, Quick Start Instructions

Page: 46 / 84

phyCORE-P87C591 QuickStart Instructions
42
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
3.6 Building the Project
You are now ready to run the compiler and linker using the Make
utility.
•
Click on the ‘Make All’ Command icon from the RIDE
toolbar or open the Project menu and select Build All or Make All.
If the program specified (Blinky2.c) contains any errors, they will be
shown in the Message Window at the bottom of the screen.
If there are no errors, the code is compiled and linked and the
executable code is ready to be downloaded to the module. The created
hexfile will have the name of the project with .hex as the filename
extension (in this case Blinky2.hex).
Note:
A machine-readable, executable hexfile has been created. Other files
(e.g. list files *.lst and map files *.m51) are generated to help the
debugging or troubleshooting and error searching process.
•
If a list of errors appears, double-click on the error to open the file
and locate the error. Use the editor to correct the error(s) in the
source code and (re-)build the project.