Phytec phyCORE-P87C591, Quick Start Instructions, Page: 34 / 84

phyCORE-P87C591 QuickStart Instructions
30
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
•
The COM Direct Properties window will now appear. Specify
Direct to COM1/COM2 under the Connect Using pull-down menu
(be sure to indicate the correct COM setting for your system).
•
Click the Configure button in the COM Direct Properties window
to advance to the next window (COM1/COM2 Properties).
•
Then set the following COM parameters: Bits per second = 9600;
Data bits = 8; Parity = None; Stop Bits = 1; Flow Control = None.