Phytec phyCORE-P87C591, Quick Start Instructions

Page: 67 / 84

Debugging
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
63
If the data transfer was successful, a screen similar to the one shown
below will appear. The Project window changed to the Debugger
page. The debug toolbar is also displayed. In the lower part of the
debug screen you will see the Command and Watch window. The
Xdata window is shown in the lower right section of the screen.
You may need to open, resize and /or move some windows to make
your screen look similar to the screen capture. You can open inactive
windows by choosing the desired window from the View pull-down
menu.
•
The debugger will automatically run to the ‘main’ function and
stop.