Phytec phyCORE-P87C591, Quick Start Instructions

Page: 43 / 84

Getting More Involved
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
39
3.5 Setting Tool Chain Options
Raisonance tools include a Make utility that controls compiling and
linking of various source files. Before using the macro preprocessor,
assembler, C compiler or linker/locator, you must configure the
corresponding options. Enter the changes as indicated below and
leave all other options set to their default values. RIDE allows you to
set various options with mouse clicks and these are all saved in your
project file.
Note:
In most cases, options can be set at the project level. However,
specific local options sometimes have to be set up differently when a
file or a group of files require special options. In this case, a popup
menu allows you to specify options at the level of the node.
To configure the Target:
•
Open the Options|Target menu and select the 8xC591 as shown
below:
•
Click on OK to save the configuration.