Phytec phyCORE-P87C591, Quick Start Instructions

Page: 22 / 84

phyCORE-P87C591 QuickStart Instructions
18
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
2.2 Interfacing the phyCORE-P87C591 to a Host-PC
Connecting the phyCORE-P87C591, mounted on the
phyCORE Development Board LD 5V, to your computer is simple:
•
As shown in the figure below, if the phyCORE module is not
already preinstalled, mount it pins-down onto the Development
Board’s receptacle footprint (X6).
•
Ensure that pin 1 of module (denoted by the hash stencil mark on
the PCB) matches pin 1 of the receptacle on the
phyCORE Development Board LD 5V.
•
Ensure that there is a solid connection between the module pins
and the phyCORE Development Board LD 5V receptacle.
Caution:
Take precautions not to bend the pins when the phyCORE module
is removed from and inserted onto the phyCORE Development
Board LD 5V.
Figure 1: Mounting the phyCORE-P87C591 onto the phyCORE Development
Board LD 5V
A
B C
D
80
1
80
1
C
B
A
F
E
D