Phytec phyCORE-P87C591, Quick Start Instructions

Page: 77 / 84

Debugging
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
73
4.8 Changing Target Settings for the "Final Version"
After successfully debugging the program, next change the target
settings in order to create an Intel hexfile. This can then be
downloaded to the Flash memory of the phyCORE-P87C591.
•
Open the Options|Target menu and select the Harvard
architecture as shown below:
•
Click on OK to save this setting.
•
Open the Options|Project|RC51 menu and choose Defines. Delete
the MONITOR51 define in the Defines input field. This will
include various printf statements in the application program that
can be viewed with a terminal emulation program. Use of the
printf statements is now possible because the serial interface is no
longer required for other communication tasks.
•
Click on OK to save this setting.
•
Open the Options|Project\LX51 menu and choose Linker.
•
Enable the Generate an Intel Hex file checkbox.
•
In the Options|Project\LX51 menu disable the checkbox ROM-
Monitor.
•
The linker/locator options are now suitable for the Debug project,
enabling you to build an absolute object file (*.aof) and a hexfile.
•
Click on the ‘Make All’ Command icon from the RIDE
toolbar or open the Project menu and select Build All or Make All.