Phytec phyCORE-P87C591, Quick Start Instructions

Page: 51 / 84

Getting More Involved
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
47
3.8.6 Starting the Terminal Emulation Program
•
Start HyperTerminal and connect to the target hardware using the
following COM parameters: Bits per second = 9600; Data bits = 8;
Parity = None; Stop Bits = 1; Flow Control = None.
•
Resetting the phyCORE Development Board LD 5V (at S2) will
execute the Hello2.hex file loaded into the Flash.
•
Now push the <Space> bar on your keyboard once to start the
automatic baud rate detection on phyCORE-P87C591 module.
•
Successful execution will send the modified character string
"PHYTEC... Stick It In!" to the HyperTerminal window.
•
Click the Disconnect icon .
•
Close the Hyper Terminal program.
You have now modified source code, recompiled the code, created a
downloadable hexfile, and successfully executed this modified code.