Phytec phyCORE-P87C591, Quick Start Instructions

Page: 72 / 84

phyCORE-P87C591 QuickStart Instructions
68
© PHYTEC Meßtechnik GmbH 2002 L-586e_2
4.6.3 Step Into and Step Over
•
Click on the Step Into icon to enter the ‘led()’ function.
•
Notice that the local variable state is now shown in the Watch
window. The initial value is ‘0’.
•
Now click on the Step Over icon four times to single-step through
the‘led()’ function. Notice that a new value (‘1’) for the local
variable state is shown in the Watch window after the first step
over command.
•
Notice that the LED (D3) on the Development Board illuminates
after the third time you clicked on the Step Over icon.