Mounting and removal
108928_en_02
PHOENIX CONTACT
27 / 84
4.3
Mounting the Smart Element
A Smart Element and its slot are mechanically designed in such a way that you can only
insert the Smart Element in one direction.
•
Insert the Smart Element vertically into its slot (A).
•
Push the release mechanism into the guide as far as it will go (B). This latches the
Smart Element.
Figure 4
-
2
Inserting and latching the Smart Element in its slot
4.4
Removing the Smart Element
•
Before removing a Smart Element, you might have to remove the inserted cables.
“Removing cables from the terminal point” on page 36
•
To remove the Smart Element from its slot, pull the release mechanism vertically
upwards (A).
•
Pull the Smart Element out of its slot (B).
Figure 4
-
3
Removing the Smart Element from its slot
Make sure that each Smart Element is latched in its slot.
This is only ensured if the release mechanism has been pushed into the guide as far as it
will go.
A
B
B
A