EN 13
3139 785 31681
4.
Mechanical Instructions
4) Service Position is achieved by placing the Analog Board
in the vertical position as shown in Figure 4-14.
Figure 4-14: HDMI and Analog Boards Service Position
4.6
Dismantling of the Front Panel assembly
1) Remove the DVD Tray cover assembly 910 as given in
step
4-1.
2) Loosen the Digital Board 1004 as given in step 4-4.
There are 2 cables below the Digital Board that are
tapped to the Bottom plate 182 that must be released in
order to dismantle the Front Panel assembly.
3) Loosen the DTTM and IR Blaster Boards (see step 4.5) to
disconnect the 2 cables
4) Loosen 4 4 catches (top) and 4 2
catches (bottom) to pull the Front Panel assembly
towards the front away from the Bottom chassis 178.
5) Service position is achieved by placing the Front Panel
assembly by the side & reconnecting the 3 cables.
Figure 4-15: Front Board Service position
Insulation Sheet
Insulation Sheet