EN 10
3139 785 31681
4.
Mechanical Instructions
4. Mechanical Instructions
Note: The position numbers given here refers to the
Exploded view on chapter 10.
4.1
Dismantling of the DVD Tray cover manually
1) Insert a screw-driver into the slot provided at the bottom
of the set and push in the direction as shown in
picture 4-1 to unlock before sliding the Tray cover
assembly 910 out.
Figure 4-1
2) Remove the Tray cover assembly 910 as shown in
Figure
4-2.
Figure 4-2
4.2
Dismantling of the Basic Engine (Drive D4.3)
1) Remove 9 screws to loosen Top cover 210.
2) Remove 4 screws to loosen the Basic Engine assembly
1008+191+902 as shown in Figure 4-3.
Figure 4-3
3) Remove 2 screws to loosen the Bracket Loader 191 and
uncatch the Dust cover assembly 902.
4) Remove 4 screws to loosen the Cover of the Basic
Engine to reach Service position Figure 4-4.
Figure 4-4: Basic Engine Service position
4.3
Dismantling of the HDD / PSU Board
1) Remove 4 screws to loosen the HDD assembly
1009+192+222 as shown in Figure 4-5.
Figure 4-5: Digital Board
