Diagnostic Software
EN 62
HDRW720/0x, DVDR725H/0x
5.
3
Input Audio Signal is routed from FRONT Cinch In to Digital Board.(This is same as path ID
01)
4
Input Signal is from Rear Cinch In1 and it will be routed to Digital Board..
5
No routing.
6
No routing.
7
No routing.
8
No Routing.
9
No routing.
10
No Routing.
11
No Routing.
12
No Routing.
13
Input Signal is from Digital Board and it will be routed to the digital board.
14
No routing.
15
Input is Audio Signal from TUNER and it will be routed to Digital Board.
16
Input signal is AUDIO from dvio board and will be routed to Digital Board.
17
No routing.
18
No routing.
19
No routing.
20
Input signal is from REAR AUDIO IN 2 and will be routed to the digital board.
21
Input signal is from REAR AUDIO IN 1 and will be routed to the digital board.
22
Input signal is from REAR AUDIO IN 1 and will be routed to the digital board.
23
The Audio signal received from the Digital board will be outputted on Modulator channel 3.
24
The Audio signal received from the Digital board will be outputted on Modulator channel 4.
Nucleus Name
DS_ANAB_SelectTunerChannel
Nucleus Number
1114
Description
Set the tuner to receive a valid audio and video signal
User Input
<Frequency*16> <video standard id>Tuner frequency: to tune the tuner to e.g. 216
MHz, this parameter must be 3456. (Since 216*16 = 3456. This is to avoid the decimal
points to the parameter list.)Video standard id: The table below shows which video
standards are possible
Video standard id
Europe
NAFTA
163248648096112
PAL_BG
NTSC
PAL_I
Invalid
PAL_DK
Invalid
SEC_L
Invalid
SEC_LS
Invalid
SEC_BG
Invalid
SEC_DK
Invalid
Example
DS:> 1114 3456 16
111400:
Test OK @
Nucleus Name
DS_ANAB_IICWriteRead
Nucleus Number
1115
Description
Perform an IIC write and read action on the analogue board
User Input
Writing:
[<W>|<w>] [I2C address] [number of data bytes to write]
with
<data[0]...data[n]> Max 16 data bytes (n < 16).
Reading:
[<R>|<r>] [I2C address] [number of data bytes to read]
Max 16 data bytes (n < 16).
Example
DS:> 1115 w 0x94 2 0x06 0x02
111500:
Test OK @
Nucleus Name
DS_ANAB_ClockAdjust
Nucleus Number
1116
Description
Set the clock to the value passed through in the YYYY MM DD HH MM SS format
User Input
<YYYY> <MM> <DD> <HH> <MM> <SS>
Example
DS:> 1116 2002 11 11 11 11 11
111600:
Test OK @
Summary of Contents for DVDR725H
Page 148: ...EN 148 HDRW720 0x DVDR725H 0x 7 Circuit Diagrams and PWB Layouts ...
Page 171: ...Circuit IC descriptions and list of abbreviations EN 171 HDRW720 0x DVDR725H 0x 9 Figure 9 11 ...
Page 172: ...Circuit IC descriptions and list of abbreviations EN 172 HDRW720 0x DVDR725H 0x 9 Figure 9 12 ...
Page 193: ...Circuit IC descriptions and list of abbreviations EN 193 HDRW720 0x DVDR725H 0x 9 ...