Magnum C3C Spreader Sprayer
Operator Manual
Refer to the cover page for restrictions regarding
Page 62
reproduction or disclosure of this material.
Septenber/08
MAINTENANCE (continued)
p.
Grease each pillow block on the jackshaft located under the hood, using Mobillux EP
2 grease, or equivalent. Each pillow block has a zerk fitting. If a fitting is missing,
replace the fitting.
q.
Grease each zerk fitting (2) on front, underside of transmission/axle using Mobillux
EP2 grease, or equivalent.
r.
Grease each zerk fitting (2) on front wheel hubs using Mobillux EP2 grease, or
equivalent.
s.
Check the belts. Replace if necessary.
t.
Check and adjust the brakes if necessary.
u.
Replace the Spinner Platter.
v.
Flush and clean the spray tank and strainer.
w.
Perform Safety Systems Check (refer to Section 4).
8. Year end maintenance when you perform this maintenance, date the maintenance log, initial
the log, and check off each procedure. Pay particular attention to the following items:
a.
Make copies of the Scheduled Maintenance Log to be used for this machine.
Record completion of each maintenance item. Keep the copy with your Operators
Manual.
b.
Check the machine hour meter. When it flashes LUBE perform the 25-hour
maintenance listed below. The Hour meter will stop flashing automatically whether
maintenance has been done or not.
c.
Perform the maintenance and inspections in the Daily Maintenance Checklist
provided in the Maintenance section taking extra care in washing and applying WD-
40 to ALL aluminum surfaces and moving parts.
d.
Change engine oil.
e.
Change clutch oil.
f.
Check or replace the air filter (refer to engine manual).
g.
Clean the carburetor sediment cup (refer to engine manual).
h.
Check and adjust the spark plug (refer to engine manual).
