Magnum C3C Spreader Sprayer
Operator Manual
Refer to the cover page for restrictions regarding
reproduction or disclosure of this material.
Page 55
September/08
Failure Mode
Check
Corrective Action
Sprayer has no output
(continued).
Check the pump.
Verify that the pump shaft is
turning when the engine
speed is increased to 3450
rpm. If necessary, tighten the
setscrew on the pulley.
If the pump shaft is turning,
loosen the suction fitting and
check for flow.
If there is suction flow, tighten
the suction fitting and loosen
the discharge fitting. Check
for high-pressure flow. If
there is flow and pressure,
tighten the discharge fitting.
If there is no flow, replace the
pump.
Table 8. Sprayer Does Not Operate (sheet 2 of 2)
