Magnum C3C Spreader Sprayer
Operator Manual
Refer to the cover page for restrictions regarding
Page 24
reproduction or disclosure of this material.
Septenber/08
DRIVING, OPERATION,
AND
SAFETY
(continued)
Safety Systems Check
It is mandatory that ALL new Magnums receive the following safety inspection prior to use and
periodically, as called for, in Section 8 Maintenance. All operators and service personnel must
be trained in the safety features, basic operation, and maintenance of the Magnum prior to use.
Refer to Figure 2 for location of the main operating controls.
An untrained operator or mechanic subjects himself and others to
death or serious injury. Untrained or underage individuals are not to
operate or maintain this equipment. The owner is responsible for
training operators and mechanics. Before operating the machine, an
operator must read and understand the Operator Manual and other
training material. If the person cannot read English, the owner is
responsible to explain the material to them. Training MUST include
SUPERVISED driver’s training with adequate practice time for the
operator to become competent in controlling the machine under all
conditions.
The operator must be familiar with safe operation of the equipment,
operator controls and safety signs.
The Operator Manual is part of this machine and MUST be available to
the operator and service personnel at all times.
1)
Check and top off oil (refer to Table 9. in Section 8 Maintenance for proper type).
a) Check engine oil.
b) Check clutch housing oil.
2)
Remove gas cap, fill gas tank. Replace gas cap securely.
Gasoline is flammable and the vapors are explosive. Exhaust fumes
can suffocate. Take these precautions to avoid death or serious injury:
Shut off fuel valve while transporting or maintaining this machine.
DO NOT smoke while operating or refueling
DO NOT add fuel when engine is running or hot
DO NOT run engine indoors or in an enclosed area
3)
Perform the following safety systems checks. If ANY Safety System Check Fails, Do not
continue the Test or operate the machine. Call Our Tech Support Department for
instructions.
