Magnum C3C Spreader Sprayer
Operator Manual
Refer to the cover page for restrictions regarding
reproduction or disclosure of this material.
Page 67
September/08
MAINTENANCE (continued)
MAINTENANCE AND SAFETY CHECKLIST LOG FOR MACHINES LEFT IDLE FOR MORE
THAN 1 WEEK
Ride-On Magnum C3C Serial No.__________
Reproduce sheets for this machine and record maintenance. Keep with machine.
MAINTENANCE TO BE PERFORMED IF MACHINE WILL BE IDLE FOR MORE THAN 1 WEEK
DATE
INITIALS
HOUR
METER
READING
CHECK
OFF
MAINTENANCE TO BE PERFORMED
Perform Daily maintenance
Change engine oil.
Change engine gearbox oil.
Replace the air filter (refer to the engine manual).
Clean the sediment cup (refer to the engine
manual).
Check and adjust the spark plug (refer to the
engine manual).
Check the fuel tank for contamination and residue.
Clean the tank and filter if necessary.
Calibrate spreader system. Operator Manual page
301
Calibrate sprayer system. Operator Manual page
305
Check cables. Replace if worn or damaged.
Check and adjust the valve clearance*.
Grease rear wheel bearings.
Grease the articulating rod ends.
Grease the pillow blocks.
Grease (2) transaxle zerks on front, underside
Grease (2) Front wheel hubs
Check the belts. Replace if necessary.
Check and adjust the brakes.
Check the spinner platter. Replace if necessary.
NOTES:
Perform Safety Systems Check (Section 3)
*Unless you are technically qualified, these checks and adjustments must be done by an
authorized Honda service center.
