PerkinElmer RamanStation 400, Getting Started Manual

Page: 90 / 118

90 . RamanStation 400 Series Getting Started Guide
Parameter Recommended Set Up
Scan time
(Experiment page/Set-up tab)
5 seconds (sample dependant)
Number of scans
(Experiment page/Set-up tab)
5 (sample dependant)
Spectral Information Range
(Experiment page/Advanced tab)
95 – 3500 cm
−1
Spectral Information Data Interval
(Experiment page/Advanced tab)
2 cm
−1
(default)
Background Handling –
Number of Background Scans
(Experiment page/Advanced tab)
5 (the recommendation is that this should be
same as Number of scans , and a minimum
of 1)
Background Handling
– Renew background at start of each sample
(Experiment page/Advanced tab)
Yes
Sampling Area
(Experiment page/Sampling tab)
Select the number and style of sampling points
Sampling Type
(Experiment page/Sampling tab)
If applicable, select the spacing and number of
points
Accessory Configuration – Beam path
(Instrument page/Hardware tab)
Designated sample output ( Sample
Compartment , FOP )
Accessory Configuration –
Sample accessory and Sample holder
(Instrument page/Hardware tab)
Select the appropriate Sample accessory and
Sample holder.
Video Preview
(Video Preview page)
If using with a sample stage alignment camera
you can set the sample position using the
cross hair alignment.
Spectral Preview
(Spectral Preview Page)
Focus on the sample using Auto Focus or
Manual Focus (using the arrows on the Stage
Control page)
Table 3 Recommended experimental setup