PerkinElmer RamanStation 400, Getting Started Manual

Page: 54 / 118

54 . RamanStation 400 Series Getting Started Guide
Installation Procedure
NOTE: It is important to note that you must be logged on at Administrator level on Windows
before installing the software.
The Installation Wizard helps you install the software on your PC.
1. Place your
Spectrum Software CD
into your CD drive.
The Spectrum software must be version 6.2 or later.
2. If the installation program does not start automatically, from the Start Menu select
Run
.
The Run dialog is displayed.
3. Enter
d:\Setup.exe
and then click
OK
.
Replace d:\ with the drive letter for your CD.
The InstallShield Wizard dialog appears while the system is preparing to install the
software.
When the installer is ready, the Welcome dialog is displayed.
If your PC does not meet the software requirements given in Software Requirements
starting on page 39, an appropriate error message will inform you of the problem. You
will need to correct this problem before the installation can be performed.