PerkinElmer RamanStation 400, Getting Started Manual

Page: 16 / 118

16 . RamanStation 400 Series Getting Started Guide
Electrical Safety
The spectrometer comes assembled within a protective housing to prevent exposure to
electrical hazards. There are also a number of exterior service panels that should only be
removed by PerkinElmer Service Engineers.
WARNING
Removal of the protective housing or external panels is dangerous and
is not recommended under any circumstances.
Removal of the protective housing or external panels without prior
written permission will invalidate the instrument warranty.
If the protective covers or service panels on the instrument appear to be
damaged, turn the instrument off, secure the instrument against any
unauthorized operation and contact PerkinElmer for advice before using
it again.
Electrical Protection
Insulation: Class I rating for external circuits. Only connect equipment that meets the
requirements of IEC 61010-1, IEC 60950 or equivalent standards.
Installation Category: The instruments are able to withstand transient overvoltages typically
present on the MAINS supply. The normal level of transient overvoltages is impulse
withstand (overvoltage) category II of IEC 60364-4-443.
Pollution Degree 2: Normally only non-conductive POLLUTION occurs. Occasionally, however,
a temporary conductivity caused by condensation must be expected.