Peregrine Systems DPND-523-EN12, Setup Manual

Page: 111 / 170

Network Property Groups | 111
Setup Guide
„
Administration > Network configuration > Network Property Groups >
List Network Property Groups
The list is a table with the names of the groups on the left and the names of the
properties across the top.
Here is a list of default Network Property Groups:
„
global
„
Active discovery
„
Do not allow discovery
„
Resource/Environment manage
„
Do not resource manage
„
Unmanaged router
„
DHCP server
„
Restrict to scanned-only
„
All off
„
Passive discovery
„
Remove address
The properties
Each Network Property Group contains the same properties, but the value of
each property is different—“on,” “off,” or “inherit”—depending on the group. If
a group “inherits” a value, it takes whatever value belongs to the parent range
of any range the group is applied to.
You can change any of the Network Property Groups, or add your own as you
become better acquainted with Network Discovery. It is important to
understand that Network Discovery has a series of hardcoded default settings
for these properties, and the user cannot change them. This means that even
the “global” property group can “inherit” settings from this hardcoded list.