Enter the host name | 81
Setup Guide
Enter the host name
A host name allows you to refer to a device by a name rather than an IP address.
Network Discovery uses the host name to refer to itself in the e-mails it sends.
Note:
Define a domain name server before changing the host name.
The
Host name
page has two modes: prompted and manual.
In prompted mode, Network Discovery will try to read its own host name from
the domain name server. If Network Discovery finds a host name matching its IP
address, you will be asked to confirm that the match is correct.
In manual mode, Network Discovery has failed to find a match for its own IP
address. You will be given the option to enter a host name.
To change the host name
1
Click
Administration
>
Appliance management
>
Host name
.
If the Current host name is correct, click
Confirm
. No further action is
necessary.
If you want to change the Host name, go to
Step 2
.
2
Enter the new host name.
3
Click
Change
.
Summary of Contents for DPND-523-EN12
