50 | Install and Start Network Discovery
Network Discovery
5
Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
Logical Processor Enabled
Sequential Memory Access Disabled
6
Press
Esc.
You see the Main menu again.
7
Use the arrow keys to select
Boot Sequence
and press
Enter.
8
Press
Enter
again.
9
Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
1. CD-ROM Device
2. Hard Drive C:
3. Embedded Primary MBA v6.2.6 Slot 0200
4. Diskette Drive A:
10
Press
Esc.
You see the Main menu again.
11
Use the arrow keys to select
Hard-Disk Drive Sequence
and press
Enter.
12
Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
1. Embedded #428 10X0,A:00
2. System BIOS boot devices
13
Press
Esc.
You see the Main menu again.
14
Use the arrow keys to select
Integrated Devices
and press
Enter.
15
Verify that the options are set as follows. Do not change options that are not
listed here. Use the arrow keys to make changes.
Summary of Contents for DPND-523-EN12
